Anitique Photoflash Bulbs

Single-use Photoflash Bulbs From the Mid-20th Century

 
  1. Large foil-filled Edison (screw/Mazda) base bulb (top-left)
    Crumpled aluminum/magnesium foil inside a glass envelope with an Edison screw base. Typical of earlier/larger Class M or similar bulbs such as GE #11/#22 equivalents or Sylvania Press 40-type bulbs. Foil-filled types were common before widespread wire/zirconium fills.

  2. Large foil-filled Edison-base bulb (top-center)
    Bigger version of the above, heavily packed with crumpled foil, Edison base. GE #50 (or Sylvania #3 equivalent)—about 5–5.25 inches tall and ~2.75 inches in diameter. These were Class S (slow-peak) high-output bulbs used for large areas or open-flash work; guide numbers were very high.

  3. Clear screw-base bulb with visible filament (top-right)
    Smaller clear glass envelope, brass Edison/screw base, and a visible filament structure (wire or fine zirconium rather than bulky crumpled foil). This is consistent with a smaller wire-filled Class M photoflash (e.g., GE #11-type or similar).

  4. Small clear bayonet-base oval bulb (bottom-left)
    The #6 / FP26 is specifically the Class FP (Focal Plane / Flat Peak) version. It has a longer, flatter light output (roughly 60 ms total burn, ~25 ms near peak) so the moving slit of a focal-plane shutter can expose the whole frame evenly at higher speeds.

    GE recommended the #6 for cameras up to about 2¼ × 3¼ (or the 2×3 Speed Graphic at 1/1000 s); larger FP cameras used the much bigger Edison-base #31 instead.

  5. Flashcube (bottom-center-left, square metallic/plastic unit) The square item with reflective/metallic faces is a Flashcube (Sylvania/Kodak era, introduced ~1965–66). It contains four small AG1-sized blue-coated bulbs, each with its own reflector, in a rotating plastic cube. Used on Instamatic-style cameras; one face fires per shot. (Magicubes look similar but use mechanical ignition and a different socket.)

  6. Small blue/purple-coated bayonet-base bulb (bottom-center-right)
    Compact blue-lacquered glass with a bayonet base. The blue coating raises color temperature to ~5500–6000 K so the bulb can be used with daylight-type color film (or for B&W). Common designations end in “B” (e.g., #5B, M2B, AG1B, Press 25B). Output is typically about one stop less than the clear version of the same size.

  7. Small clear round bayonet-base bulb (bottom-right)
    Another compact clear bayonet-base photoflash, similar in family to item 4 (egg- or peanut-sized Class M types such as #5, M3, or related). Clear versions are for black-and-white film or with filters.

Notes on identification and use

  • Bases: Large ones use Edison/Mazda medium screw; smaller ones use bayonet (or later flange/baseless).

  • Fillings: Early/large bulbs often used crumpled aluminum or magnesium foil; later/smaller ones used fine wire or zirconium for faster peaks and more light per volume.

  • Classes: Most common were M (medium peak, ~20 ms to peak, for leaf shutters with M-sync) or FP (flat/long peak for focal-plane shutters). Large ones like the #50 were often Class S.

  • Blue vs. clear: Blue for daylight color film; clear for B&W (or with filters).

  • All are single-use; they contain oxygen + combustible metal and are coated so the glass doesn’t shatter. A blue indicator spot (if present) turns pink if the seal has failed.